IPHONE REPAIR SERVICES
Technical Support
IPHONE REPAIR SERVICES
Screen Replacement:
Disassemble the iPhone and remove the damaged screen using specialized tools such as suction cups and spudgers.
Install a new screen, ensuring proper alignment and connection of display cables.
Perform calibration procedures to adjust touch sensitivity and ensure accurate display rendering.
Battery Replacement:
Remove the old battery and disconnect it from the logic board, taking care to avoid damage to surrounding components.
Install a new battery and calibrate it using battery management software to ensure optimal performance and longevity.
Test charging functionality and monitor battery health metrics to verify proper operation.
Charging Port Repair/Replacement:
Disassemble the iPhone and access the charging port assembly.
Repair or replace damaged or worn-out charging port components, such as flex cables or connector pins.
Conduct electrical continuity tests to verify proper connection and functionality.
Speaker and Microphone Repair/Replacement:
Diagnose audio issues using diagnostic software and hardware testing equipment.
Repair or replace faulty speakers or microphones, ensuring proper alignment and connection to the audio circuitry.
Conduct audio quality tests and frequency response measurements to verify proper operation.
Camera Repair/Replacement:
Disassemble the iPhone and access the front or rear camera module.
Repair or replace damaged camera components, such as lenses, image sensors, or autofocus mechanisms.
Calibrate camera settings and perform image quality tests to ensure accurate focus, exposure, and color reproduction.
Home Button/Touch ID Repair/Replacement:
Diagnose issues with the home button or Touch ID sensor using diagnostic software and hardware tests.
Repair or replace damaged home button components, such as flex cables or fingerprint sensors.
Calibrate the Touch ID sensor and conduct fingerprint recognition tests to ensure accurate and reliable performance.
Power Button/Volume Button Repair/Replacement:
Disassemble the iPhone and access the power button or volume button assembly.
Repair or replace damaged buttons or button switches, ensuring proper tactile feedback and electrical contact.
Conduct button press tests and continuity checks to verify functionality and responsiveness.
Water Damage Repair:
Disassemble the iPhone and assess the extent of water damage using visual inspection and diagnostic tools.
Clean and remove corrosion from affected components using ultrasonic cleaning or chemical solutions.
Repair or replace damaged components, such as connectors, IC chips, or solder joints, as needed.
Conduct functional tests and moisture ingress checks to ensure proper water resistance and device functionality.
Logic Board Repair:
Diagnose logic board issues using specialized diagnostic tools, such as logic board schematics and board view software.
Perform microsoldering repairs to address issues such as short circuits, component failures, or damaged traces.
Replace damaged or faulty components, such as capacitors, resistors, IC chips, or connectors, using precision soldering techniques.
Conduct electrical continuity tests, voltage measurements, and signal analysis to verify proper operation and stability.
Software Troubleshooting and Repair:
Use diagnostic software and firmware tools to identify and diagnose software-related issues, such as system crashes, boot loops, or software glitches.
Perform software updates, restores, or firmware flashing to reinstall or repair the operating system.
Troubleshoot and resolve compatibility issues, driver conflicts, or corrupted system files using advanced debugging techniques and software utilities.
Data Recovery:
Use specialized data recovery tools and techniques to retrieve data from iPhones with damaged or corrupted storage.
Repair or bypass logical and physical damage to storage media, such as NAND flash memory chips or file system structures.
Extract and recover lost or deleted data files, including photos, videos, contacts, messages, and app data, using forensic data recovery methods and software tools.
Diagnostic Services:
Perform comprehensive hardware and software diagnostics using diagnostic software suites, hardware testing tools, and manual inspection techniques.
Identify and troubleshoot issues related to hardware components, system firmware, operating system software, and third-party applications.
Provide detailed diagnostic reports and recommendations for repair or replacement based on the findings of the diagnostic process.
Tristar (U2) IC Replacement:
Replace the Tristar (U2) IC on the logic board to address charging or USB connectivity issues.
Use microsoldering techniques to remove the faulty IC and solder a new one onto the board.
Test charging functionality and data transfer to ensure proper operation.
Audio IC (Audio IC) Replacement:
Replace the Audio IC (often referred to as "Audio IC Disease") to resolve issues with grayed-out speakerphone, no audio during calls, or microphone problems.
Use microsoldering techniques to remove the faulty IC and solder a new one onto the logic board.
Conduct audio tests to ensure proper functionality of speakers, microphones, and headphone jacks.
Baseband IC (BB CPU) Replacement:
Replace the Baseband IC (BB CPU) to address issues with cellular network connectivity, signal dropouts, or "No Service" errors.
Utilize microsoldering techniques to remove the faulty IC and solder a new one onto the logic board.
Perform network signal tests and SIM card recognition tests to verify proper cellular functionality.
Backlight Filter Replacement:
Replace damaged or burnt backlight filters to restore screen backlight functionality and eliminate dim or dark display issues.
Use microscope and microsoldering techniques to remove the faulty filter and solder a new one onto the logic board.
Conduct screen brightness tests and backlight voltage measurements to ensure proper illumination.
Touch IC (Touch Disease) Repair:
Address Touch Disease issues by reflowing or replacing the Touch IC (Touch Controller) to resolve touch screen responsiveness problems or ghost touches.
Apply controlled heat using a rework station to reflow the solder joints of the Touch IC, or replace the IC if necessary.
Perform touch screen calibration and multi-touch tests to verify proper touch functionality.
WiFi/Bluetooth IC Replacement:
Replace the WiFi/Bluetooth IC to fix issues with WiFi or Bluetooth connectivity, such as weak signal strength, intermittent connections, or inability to detect networks.
Utilize microsoldering techniques to remove the faulty IC and solder a new one onto the logic board.
Conduct WiFi and Bluetooth signal tests to ensure proper connectivity and range.
Face ID Dot Projector/IR Camera Repair:
Repair or replace malfunctioning components of the Face ID system, such as the dot projector or IR camera, to restore Face ID functionality.
Use microscope and microsoldering techniques to remove and replace damaged components as necessary.
Perform Face ID calibration and facial recognition tests to ensure accurate and reliable Face ID authentication.
Logic Board Component-Level Diagnostics and Repair:
Diagnose and repair various logic board issues using advanced troubleshooting techniques, including voltage measurements, signal tracing, and component-level analysis.
Replace damaged or defective components such as capacitors, resistors, diodes, or transistors using microsoldering techniques.
Conduct comprehensive functional tests and stress tests to verify proper operation and stability of the repaired logic board.
Front Camera and Proximity Sensor Replacement:
Replace malfunctioning front-facing cameras or proximity sensors to restore functionality for features like FaceTime and automatic screen dimming during calls.
Utilize precision tools to disassemble the device and install new camera modules or sensor assemblies.
Perform calibration procedures to ensure proper alignment and functionality.
Volume and Silent Switch Repair/Replacement:
Repair or replace faulty volume buttons or the silent/ring switch to restore control over audio settings.
Use specialized tools to access and replace the button assemblies or switch mechanisms.
Test button responsiveness and verify proper function through software diagnostics.
Dock Connector Repair/Replacement:
Address issues related to charging or data transfer by repairing or replacing the dock connector assembly.
Disassemble the device and carefully remove the damaged connector components.
Install a new connector assembly and ensure proper alignment and connection to the logic board.
Power Management IC (PMIC) Replacement:
Replace the Power Management IC (PMIC) to resolve issues with power distribution, battery charging, or device booting.
Employ microsoldering techniques to remove the faulty PMIC and solder a new one onto the logic board.
Conduct voltage and current measurements to ensure proper power delivery and device stability.
Antenna Flex Cable Repair/Replacement:
Repair or replace damaged antenna flex cables to address issues with cellular signal reception, GPS accuracy, or WiFi connectivity.
Carefully remove the damaged cable and install a new one, ensuring proper routing and connection to the logic board.
Perform signal strength tests and network performance evaluations to verify improved connectivity.
SIM Card Reader Replacement:
Replace a faulty SIM card reader to resolve issues with SIM card detection, network registration, or carrier connectivity.
Disassemble the device and remove the damaged SIM card reader module.
Install a new reader assembly and conduct SIM card insertion tests to ensure proper recognition and connection.
Ear Speaker Replacement:
Replace a malfunctioning earpiece speaker to restore audio output during phone calls.
Use precision tools to disassemble the device and access the speaker assembly.
Install a new speaker unit and conduct audio tests to verify proper sound output and clarity.
Frame and Housing Repair/Replacement:
Address cosmetic or structural damage by repairing or replacing the device frame or housing.
Disassemble the device and carefully remove the damaged frame components.
Install a new frame or housing assembly and ensure proper alignment and fitment with other device components.
Software Optimization and Performance Tuning:
Diagnose and optimize device performance by identifying and resolving software inefficiencies, memory leaks, or background processes.
Perform software updates, cache clearing, and app optimization to improve device responsiveness and battery life.
Conduct benchmarking tests and performance evaluations to measure and validate performance improvements.